Factory Customized Steel Carton Flow Rack For Efficient Solution
Carton flow is a form of shelving that uses a gravity-feed
rear-load design. Each unit consists of one or more inclined
runways. Merchandise is loaded in the rear of each runway. As an
item is removed from the front, the item directly behind it slides
forward in place of the previous one.
The cargo position of the carton flow rack is arranged by rollers.
The horizontal position of the inventory end is higher than that of
the pick-up end, forming a top-down inclined plane. Generally, we
design the inclined angle of about 5 degrees in the horizontal
plane. And the number of trays on each level will be designed
according to the weight of goods on each pallet.
Pallet flow racking system details
| Rack Name | Gravity-taken pallet flow racking system with fast stock rotation |
| Rack Type | Dynamic flow with semi-automated stock rotation |
| Upright Section | Customized sizes, commonly used sections: 80*60, 90*60, 90*70,
100*70,120*95 |
| Beam Section | Customized sizes, commonly used sections: 80*50/100*50mm |
| Product Material | High Strength Steel/American Standard Steel |
| Load Capacity | Customized load capacity, commonly with 1000/1500kg per pallet load |
| Storage Layer | Customized, 2-6 Adjustable layers |
| Features | FIFO inventory rotation, fast and efficient stock management |
| Surface finish | Powder-coated and galvanized steel for corrosion protection |
Theory
Carton flow rack is one of the derivatives of the gravity flow
rack. Its structure is similar to pallet rack, but the difference
is that the roller rail is installed on the beam, and the rail is
inclined 3 degrees to 5 degrees.
When working, the forklift will be used to carry the cargo to the
loading port of the rack, and the cargo will slide automatically
from the entrance to the other end of the loading port by using its
own weight.
Notice
The fluent strip of the rack is directly connected to the beam and
the support bar in the middle. The slope of the flow strip
installation depends on the size and weight of the container and
the depth of the shelf, usually 5%~9%. If the load is heavy, 3 to 4
flowing strips can be installed on one railway.
If the railway is long, a partition board can be used to separate
it, and the brake should be installed at the pick-up end to slow
down the cargo in order to reduce the impact.
Product Quality Control
We know that quality comes from details, so in every process of
product production and manufacturing, we have strict requirements
and control.
♦ From the selection of raw materials, we strictly use alloy steel
material. This material has good quenching and tempering physical
characteristics. Moreover, the material itself has the
characteristics of high strength and high toughness, so the
products made of this material also have such characteristics.
♦ Product manufacturing process: We have sophisticated manufacturing
equipment, (we have nearly 1,000 sets of precision molds for
different parts, and each part has a separate production line) in
the production of products by one-time forging technology.
♦ Product inspection: We have more than 30 sets of different product
production and inspection equipment (we have complete product
inspection and testing equipment). After the production and
processing of products are tested by various tensile forces and
loads and so on. The products will not go out until they pass the
inspection.
♦ Product labeling: After inspection, it will be marked on the
product according to different load capacities and specifications.
♦ Product notes: For each product, there are instructions and
product use notes.
